What the 10 MHz GBW and 5.25 V/µs slew rate mean for your signal chain
It delivers a 10 MHz gain-bandwidth product and a 5.25 V/µs slew rate, making it suitable for conditioning signals up to several hundred kilohertz — think sensor amplification, active filters, or ADC driver stages where moderate speed is enough and board space is tight.
DC precision and supply flexibility
With an input offset voltage of 80 µV and input bias current of 260 nA, this op-amp offers decent DC accuracy for a general-purpose part — adequate for many non-inverting gain stages and low-side current sensing where you don't need the sub-µV performance of an auto-zero amplifier. Quiescent current sits at 1.03 mA per channel, a reasonable trade-off between speed and power for battery-aware designs.
The SC-70-5 (SOT-353) footprint is a space-saver: five pins, 2 mm × 2.1 mm body, surface-mount only. That small pad area means thermal dissipation is limited; keep the total power within the package's capability, especially if driving low-impedance loads continuously.
Lifecycle and sourcing posture
For BOM resilience, the SC-70-5 package is shared across several TI general-purpose op-amp families, so a pin-compatible alternate can be qualified without a board spin.