Single-channel 5 MHz op amp in a hand-solderable SOT-23-5
The LMV710M5/NOPB is a single-channel general-purpose operational amplifier from Texas Instruments, delivering a 5 MHz gain-bandwidth product and a 5V/µs slew rate — enough bandwidth for audio filtering, sensor buffering, or low-speed data acquisition without the power penalty of a wider-band part. Its rail-to-rail output stage lets it swing close to the supply rails, which is handy when running from a single 3.3 V or 5 V rail and you need every millivolt of headroom for an ADC input.
Parametric fit for signal-chain designs
Input bias current is just 4 pA typical, and input offset voltage is 400 µV — low enough that a high-impedance sensor (like a photodiode or pH probe) won't see a significant DC error from the amplifier's own input current. Supply current is 1.17 mA per channel, and the output can source or sink 40 mA — enough to drive a small relay coil or an LED indicator directly. Operating from 2.7 V to 5.5 V single supply, it fits into 3.3 V and 5 V systems without a negative rail, and the -40°C to 85°C temperature range covers most industrial and commercial environments.
Lifecycle and sourcing reality
Texas Instruments lists the LMV710M5/NOPB as Active and ROHS3 compliant — no end-of-life notice, no last-time-buy pressure. It is available in Tape & Reel or Cut Tape, surface-mount in the SC-74A / SOT-23-5 package, a footprint that is easy to hand-solder or machine-place.