Skip to main content
Texas Instruments LMV604MAX/NOPB — Logic ICs
Texas Instruments

LMV604MAX/NOPB Texas Instruments Quad Op-Amp, 1 MHz

MPNLMV604MAX/NOPB
End of Life

Texas Instruments LMV604MAX/NOPB, LMV® series, quad general-purpose op-amp, 1 MHz gain bandwidth, rail-to-rail output, 100 µA per channel supply, 2.7 V to 5.5 V supply, 14-SOIC package, -40°C to 125°C operating temperature.

$1.55Ref. price · indicative, final on quote
LMV604MAX/NOPB datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMV604MAX/NOPB Technical Specifications
ParameterValue
SeriesLMV®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset550 µV
Voltage - supply span5.5 V
Current - supply100µA (x4 Channels)
Current - input bias0.02 pA
Current - output (Channel)113 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

100 µA per channel — the decision spec for battery-powered analog

The LMV604MAX/NOPB is a quad general-purpose op-amp from Texas Instruments in the LMV® series. Its defining characteristic is the 100 µA per channel supply current, which makes it a strong candidate for multi-channel sensor conditioning, battery monitors, and portable instrumentation where every microamp counts.

Quad channel count in a 14-SOIC footprint

Four amplifiers in a 14-SOIC package saves board area and per-channel cost compared to using four single op-amps. The 0.02 pA input bias current suits high-impedance sensor interfaces like photodiodes or pH probes where bias-induced offset matters. Output drive is rated at 113 mA per channel, enough to directly drive a small relay or LED indicator without a buffer transistor.

ROHS3 compliant.

Frequently asked questions

Is LMV604MAX/NOPB a rail-to-rail output op-amp?

Yes, the output type is rail-to-rail, which maximizes dynamic range in low-voltage single-supply designs.

What is the gain bandwidth product of LMV604MAX/NOPB?

The gain-bandwidth product is 1 MHz, suitable for low-frequency sensor conditioning and audio paths.