Skip to main content
Log in
Texas Instruments LMV601MG/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)

LMV601MG/NOPB General Purpose Op-Amp, 1 MHz, Rail-to-Rail

MPNLMV601MG/NOPB
End of Life

Texas Instruments LMV601MG/NOPB, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 1 MHz GBW, 1V/µs Slew Rate, 2.7V to 5.5V Supply, SC-70-6 Package, -40°C to 125°C.

$1.22Ref. price · indicative, final on quote
Texas Instruments LMV601MG/NOPB datasheet (PDF)
Packaging6-TSSOP, SC-88, SOT-363
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV601MG/NOPB specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset250 µV
Voltage - supply span5.5 V
Current - supply107µA
Current - input bias0.02 pA
Current - output (Channel)113 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1V/µs
Case6-TSSOP, SC-88, SOT-363
Number of circuits1

Product details

Operating from 2.7 V to 5.5 V and rated from -40°C to 125°C, it fits battery-powered sensor interfaces, portable instrumentation, and industrial signal conditioning where board space is tight and power budget is tight.

Supply current and bandwidth — the trade-off that matters

At 107 µA supply current, this op-amp is optimised for low-power paths — think a thermistor front-end or a photodiode amplifier that runs continuously on a coin cell. The 1 MHz gain-bandwidth product is enough for audio-band filtering or slow ADC drivers, but not for high-speed data acquisition. If you need more bandwidth at similar quiescent current, the TLV9351IDCKR offers 3.5 MHz and 20 V/µs slew rate, though its input offset voltage is 350 µV versus 250 µV here.

Rail-to-rail output swings close to the supply rails. Input bias current is 0.02 pA.

Frequently asked questions

What is the difference between LMV601MG and LMV601MG/NOPB?

The /NOPB suffix indicates lead-free (RoHS-compliant) plating. The LMV601MG without the suffix may have tin-lead finish. Electrically and functionally they are identical — same die, same specifications. The /NOPB version is the current green offering.

What is the supply current and bandwidth of the LMV601MG/NOPB?

Supply current is 107 µA typical. Gain-bandwidth product is 1 MHz. Slew rate is 1V/µs. These numbers define the part as a low-power, moderate-speed general-purpose op-amp.

Is the LMV601MG/NOPB rail-to-rail output?

Yes, the output type is rail-to-rail. The output can swing close to both supply rails, maximising signal range in low-voltage single-supply designs.