Skip to main content
Log in
LMV358QD

Texas Instruments LMV358QD General Purpose Op-Amp

MPNLMV358QD
End of Life

Texas Instruments LMV358QD, general purpose dual op-amp, 1 MHz gain bandwidth, 1V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 8-SOIC package, -40°C to 125°C.

$1.63Ref. price · indicative, final on quote
Texas Instruments LMV358QD datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV358QD specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.7 mV
Voltage - supply span5.5 V
Current - supply210µA (x2 Channels)
Current - input bias15 nA
Current - output (Channel)40 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product1 MHz
PackageTube
Slew rate1V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual op-amp for single-supply signal chains

It delivers a 1 MHz gain-bandwidth product and a 1V/µs slew rate, with rail-to-rail output swing. Supply current is 210 µA per channel.

Because the output swings rail-to-rail, a designer gets the full ADC input range without needing a separate reference or level shifter. The 40 mA per-channel output drive is enough to directly feed a typical SAR ADC input or drive a modest analog meter.

Active lifecycle, no obsolescence watch

No last-time-buy or end-of-life notice is on record.

Frequently asked questions

Is LMV358QD rail-to-rail?

Yes, the LMV358QD has a rail-to-rail output stage, allowing the output to swing close to both supply rails — useful for maximizing ADC input range on a single 3.3 V supply.

Can LMV358QD operate from a single 3.3V supply?

Yes. The 2.7 V minimum supply span means 3.3 V is well within range, and the rail-to-rail output gives full swing on that rail.

What is the equivalent of LMV358QD?

For a dual general-purpose op-amp with similar supply range and rail-to-rail output, the TLV9362IDDFR offers a higher 10.6 MHz GBW and 25 V/µs slew rate but draws more supply current (2.6 mA total). The TLV9351IDCKR is a single-channel alternative with 3.5 MHz GBW. Neither is a drop-in replacement — verify pinout and compensation before substituting.