Texas Instruments LMV342MM/NOPB, LMV® series, dual CMOS rail-to-rail op-amp, 1 MHz GBW, 1 V/µs slew rate, 2.7 V to 5.5 V supply, 107 µA per channel, 113 mA output, -40°C to 125°C, 8-VSSOP package.
| Parameter | Value |
|---|---|
| Series | LMV® |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 700 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 107µA (x2 Channels) |
| Current - input bias | 0.02 pA |
| Current - output (Channel) | 113 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 1 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 1V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The Texas Instruments LMV342MM/NOPB is a dual CMOS operational amplifier from the LMV® series, delivering rail-to-rail output swing on a 2.7 V to 5.5 V supply span. Each channel draws 107 µA supply current while sourcing or sinking 113 mA — a combination that suits battery-operated sensor interfaces, portable instrumentation, and single-supply ADC drivers.
Yes, the 2.7 V minimum supply and 107 µA per-channel quiescent current make it well-suited for battery-operated designs.
The LMV358 is a different device; the LMV342MM/NOPB offers lower input bias current (0.02 pA) and rail-to-rail output, while the LMV358 has a wider supply range but higher bias. Check the specific circuit requirements before substituting.