LMV® series, General Purpose Amplifier, 4 Circuit, Rail-to-Rail, 14-SOIC, 1 MHz GBW, 1V/µs slew rate, 2.7 V to 5.5 V supply, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Series | LMV® |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1.7 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 410µA (x4 Channels) |
| Current - input bias | 15 nA |
| Current - output (Channel) | 160 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 1 MHz |
| Package | Tube |
| Slew rate | 1V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
The LMV324M/NOPB: Quiescent supply current is 410 µA total for all four amplifiers. Input bias current is 15 nA. Input offset voltage is 1.7 mV.
Surface-mount assembly with no exposed pad — the thermal path goes through the leads. The supplier device package is 14-SOIC, same as the package/case, so no footprint mismatch between the two identifiers.
Product status is Active and ROHS3 compliant.
Yes, the supply range is 2.7 V to 5.5 V, so 3.3 V is well within the operating window. The rail-to-rail output stage maintains signal swing close to the rails at 3.3 V.
Each of the four channels can deliver 160 mA of output current. That is unusually high for a general-purpose op-amp and allows direct drive of small loads like LEDs, relays, or piezo buzzers without an external transistor.
The LMV324M/NOPB is sourced to order through independent distribution. Submit an RFQ for current pricing and availability; stock and lead time are confirmed at quote time. Counterfeit detection and traceability are part of the supply chain for this active part.
No manufacturer-published second-source cross-reference exists. The TLV9351IDCKR is a single-channel part with higher bandwidth (3.5 MHz) and lower input bias (10 pA), but it is a different footprint and channel count. For a quad replacement, look at the OPA4374 (6.5 MHz, CMOS input) in the same 14-SOIC package — verify pinout and supply range before swapping.