Texas Instruments LMV321IDBVT, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 1V/µs Slew Rate, 1 MHz Gain Bandwidth, 2.7V to 5.5V Supply, -40°C to 125°C, Surface Mount SOT-23-5.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1.7 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 130µA |
| Current - input bias | 15 nA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 1 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 1V/µs |
| Case | SC-74A, SOT-753 |
| Number of circuits | 1 |
The part operates from a 2.7 V to 5.5 V supply span and is rated over the -40°C to 125°C temperature range, making it suitable for industrial sensor interfaces, battery-powered signal conditioning, and general-purpose analog processing where board space is tight.
The 1 MHz gain-bandwidth product sets the usable closed-loop gain bandwidth.
As a general-purpose rail-to-rail output op-amp with 1 MHz GBW and 130 µA supply current, it is commonly used in battery-powered sensor conditioning, portable instrumentation, active filters, and low-power signal chains where board space is limited.
For a higher-speed single-channel alternative with lower input bias, the TLV9351IDCKR offers 3.5 MHz GBW and 20 V/µs slew rate. For a dual-channel option, the TLV9362IDDFR provides 10.6 MHz GBW and 25 V/µs slew rate. Both are rail-to-rail output and operate over the same -40°C to 125°C range.