Precision op-amp in a small SOT-23-5 footprint
The LMV2011MF/NOPB is a single-circuit, general-purpose operational amplifier from Texas Instruments, housed in a 5-pin SOT-23-5 package. It combines a 3 MHz gain-bandwidth product with a 4 V/µs slew rate, making it suitable for signal conditioning in sensor interfaces and data acquisition chains. Its standout parameter is the 0.12 µV typical input offset voltage — a figure that eliminates the need for external nulling in many precision circuits — paired with a 3 pA input bias current that preserves accuracy from high-impedance sources.
Supply flexibility and output swing
The amplifier operates from a single supply spanning 2.7 V to 5.25 V, covering common 3.3 V and 5 V rails. Rail-to-rail output swing allows the signal to reach within millivolts of the supply rails, maximising dynamic range in low-voltage systems. Output current is rated at 17 mA per channel, enough to drive an ADC input or a moderate load directly. Supply current sits at 930 µA — a reasonable quiescent draw for a precision part in battery-powered or line-powered instrumentation.
Package, temperature grade, and lifecycle
The SOT-23-5 (SC-74A) surface-mount package is a standard footprint for op-amps, compatible with reflow soldering. The part is specified for the 0°C to 70°C commercial temperature range, targeting indoor equipment, benchtop instruments, and controlled environments. Texas Instruments lists the LMV2011MF/NOPB as Active in production, with ROHS3 compliance.