Texas Instruments LMP7718MAE/NOPB, LMP® series, dual general-purpose op amp, 88 MHz gain bandwidth, 11.5 V/µs slew rate, rail-to-rail output, 2 V to 5.5 V supply, -40°C to 125°C, 8-SOIC.
| Parameter | Value |
|---|---|
| Series | LMP® |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 10 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 1.3mA (x2 Channels) |
| Current - input bias | 0.1 pA |
| Current - output (Channel) | 60 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 88 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 11.5V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
The Texas Instruments LMP7718MAE/NOPB is a dual-channel, general-purpose operational amplifier from the LMP® series, packing an 88 MHz gain-bandwidth product and a 11.5 V/µs slew rate into a standard 8-SOIC package. Rail-to-rail output swing lets it drive ADC inputs or downstream stages without losing headroom on a 2 V to 5.5 V single supply.
No last-time-buy notice or end-of-life announcement is on record.
Yes, the output type is rail-to-rail, so the output can swing within millivolts of the supply rails — useful for maximizing dynamic range on low-voltage supplies.
The slew rate is 11.5 V/µs, which supports clean amplification of signals up to several hundred kilohertz without significant distortion.
This part is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time.
A close functional alternative is the TLV9362IDDFR, also a dual rail-to-rail op amp with 10.6 MHz GBW and 25 V/µs slew rate, drawing about 1.3 mA per channel. The TLV9362 trades some bandwidth for a higher slew rate, useful for faster pulse response.