Skip to main content
Log in
Texas Instruments LMP2234BMTE/NOPB — Analog & Data Acquisition

LMP2234BMTE/NOPB General Purpose Op-Amp, 130 kHz GBW

MPNLMP2234BMTE/NOPB
End of Life

Texas Instruments LMP2234BMTE/NOPB, quad general-purpose op-amp, 130 kHz gain bandwidth, 0.048 V/µs slew rate, 10 µV offset, 36 µA supply, rail-to-rail output, 14-TSSOP package, -40°C to 125°C.

$4.75Ref. price · indicative, final on quote
Texas Instruments LMP2234BMTE/NOPB datasheet (PDF)
Packaging14-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMP2234BMTE/NOPB specifications
ParameterValue
Output typeDifferential, Rail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset10 µV
Voltage - supply span5.5 V
Current - supply36µA (x4 Channels)
Current - input bias0.02 pA
Current - output (Channel)30 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product130 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.048V/µs
Case14-TSSOP (0.173\", 4.40mm Width)
Number of circuits4

Product details

Quad op-amp for low-power precision sensing

It combines a 130 kHz gain-bandwidth product with a 0.048 V/µs slew rate.

The 130 kHz gain-bandwidth product sets the usable closed-loop bandwidth. The 0.048 V/µs slew rate reinforces the same message: expect clean reproduction of DC levels and low-frequency waveforms.

Supply current and offset — the precision trade-off

At 36 µA total for four amplifiers, this is a micropower part. The 10 µV typical offset and 0.02 pA input bias current mean you can build a direct-coupled front-end without trimming or large input resistors.

Active and ROHS3 — no LTB pressure

Frequently asked questions

What is the LMP2234BMTE/NOPB?

The LMP2234BMTE/NOPB is a quad general-purpose operational amplifier from Texas Instruments, in a 14-TSSOP surface-mount package. It operates from 1.6 V to 5.5 V, draws 36 µA total supply current, and features a 130 kHz gain-bandwidth product, 10 µV input offset, and rail-to-rail output.

Is there a replacement or equivalent for LMP2234BMTE/NOPB?

There is no direct pin-compatible replacement listed in the official records. The OPA4374AIPWT is a quad op-amp in the same 14-TSSOP footprint but offers a 6.5 MHz GBW and 5 V/µs slew rate at 600 µA supply — a different speed-versus-power trade-off. Evaluate the TLV9351IDCKR (single) or TLV9362IDDFR (dual) for similar low-power general-purpose performance if your board can accommodate a different channel count.