TI LMH® series, LMH6626MM/NOPB, dual voltage-feedback op amp, 1.5 GHz GBP, 400 V/µs slew rate, 95 MHz -3dB BW, 5 V to 12 V supply, -40°C to 125°C, 8-VSSOP.
| Parameter | Value |
|---|---|
| Series | LMH® |
| Mounting type | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 100 µV |
| Voltage - supply span | 12 V |
| Current - supply | 12mA (x2 Channels) |
| Current - input bias | 13 µA |
| Current - output (Channel) | 80 mA |
| Operating temperature | -40°C ~ 125°C |
| -3db bandwidth | 95 MHz |
| Gain bandwidth product | 1.5 GHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 400V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The LMH6626MM/NOPB is supplied in an 8-VSSOP package (3.00 mm body width), surface-mount only. Supply range is 5 V to 12 V. Quiescent current is 12 mA per channel; output current is 80 mA per channel.
TI lists the LMH6626MM/NOPB as an Active part with ROHS3 compliance. There is no NRND flag or last-time-buy date, so it remains a valid selection for new designs.
The THS4215DRBT is a single-channel voltage-feedback op amp with 970 V/µs slew rate and 350 MHz bandwidth, but it is a single-channel part with a narrower -40°C to 85°C temperature range. The TLV9362IDDFR is a dual general-purpose rail-to-rail op amp with much lower bandwidth (10.6 MHz) and slew rate (25 V/µs), so it is not a direct high-speed substitute. Neither is a pin-compatible second source — verify the pinout and supply requirements before substituting.