Texas Instruments LMH6601MGX/NOPB, single voltage-feedback op-amp, 275V/µs slew rate, 250 MHz -3dB bandwidth, rail-to-rail output, 2.4 V to 5.5 V supply, SC-70-6 package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 9.6mA |
| Current - input bias | 5 pA |
| Current - output (Channel) | 180 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 250 MHz |
| Gain bandwidth product | 155 MHz |
| Package | Bulk |
| Slew rate | 275V/µs |
| Case | 6-TSSOP, SC-88, SOT-363 |
| Number of circuits | 1 |
The LMH6601MGX/NOPB: Input bias current is 5 pA, and the 180 mA output current per channel can drive a 50 Ω back-terminated line directly. The SC-70-6 package keeps board area small, but the 9.6 mA supply current is a trade-off: you pay the quiescent for the speed.
The 1 mV input offset voltage is typical for a high-speed voltage-feedback amp. The SC-70-6 package is the supplier device package.
For BOM stability, this means no near-term obsolescence risk.
The LMH6601MGX/NOPB and LMH6601MG share the same base die and package (SC-70-6). The -NOPB suffix indicates lead-free (NiPdAu) finish versus the standard tin-lead finish on the LMH6601MG. Electrically they are identical, but verify the finish compatibility with your soldering process and any RoHS requirements.