Skip to main content
Texas Instruments LMC6462AIN/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TI LMC6462AIN/NOPB CMOS Dual Op-Amp, 50 kHz GBW, 8-DIP

MPNLMC6462AIN/NOPB
End of Life

Texas Instruments LMC6462AIN/NOPB, CMOS dual operational amplifier, rail-to-rail output, 50 kHz gain bandwidth, 0.028 V/µs slew rate, 50 µA supply per channel, 0.15 pA input bias, 8-DIP (0.300", 7.62 mm) through-hole package, -40°C to 85°C operating temperature.

$6.64Ref. price · indicative, final on quote
LMC6462AIN/NOPB datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMC6462AIN/NOPB Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeThrough Hole
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span15.5 V
Current - supply50µA (x2 Channels)
Current - input bias0.15 pA
Current - output (Channel)75 mA
Operating temperature-40°C ~ 85°C (TJ)
Gain bandwidth product50 kHz
PackageTube
Slew rate0.028V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Low-frequency, micropower dual CMOS op-amp in a DIP-8

The Texas Instruments LMC6462AIN/NOPB is a dual CMOS operational amplifier with rail-to-rail output, packaged in an 8-pin DIP for through-hole assembly. Its 50 kHz gain-bandwidth product and 0.028 V/µs slew rate place it squarely in the low-frequency signal-conditioning space — think DC bridge amplifiers, thermocouple buffers, photodiode front-ends, and battery-monitoring circuits where the signal changes slowly. The 50 µA supply current per channel and 0.15 pA input bias are the real draws here: this part is built for micropower and high-impedance nodes, not for speed.

Package and mounting — through-hole legacy

The 8-DIP (0.300", 7.62 mm) package with through-hole mounting tells the sourcing story: this part is specified for boards that still use DIP sockets or wave-solder assembly.

Frequently asked questions

What are the alternatives or equivalent parts to LMC6462AIN/NOPB?

The OPA4374AIPWT is a quad CMOS rail-to-rail op-amp with higher speed (6.5 MHz GBW, 5 V/µs slew rate) but in a surface-mount package and higher supply current — it is not a pin-compatible replacement. For a dual-channel through-hole alternative, the LMC6462AIM/NOPB (SOIC-8) uses the same die in a different package.