Texas Instruments LMC6442IM/NOPB, LMC® series, dual general-purpose op-amp, 10.5 kHz gain bandwidth, 1.9 µA supply per channel, rail-to-rail output, 1.8 V to 11 V supply, -40°C to 85°C, 8-SOIC package.
| Parameter | Value |
|---|---|
| Series | LMC® |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1.5 mV |
| Voltage - supply span | 1.8 V |
| Current - supply | 1.9µA (x2 Channels) |
| Current - input bias | 0.005 pA |
| Current - output (Channel) | 2.1 mA |
| Operating temperature | -40°C ~ 85°C (TJ) |
| Gain bandwidth product | 10.5 kHz |
| Package | Tube |
| Slew rate | 0.0041V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Texas Instruments LMC6442IM/NOPB is a dual general-purpose op-amp from the LMC® series. Each channel draws 1.9 µA supply current.
At 1.9 µA per amplifier, the supply current is the dominant spec. The trade-off is a 0.0041 V/µs slew rate.
Comes in an 8-SOIC surface-mount package, supplied in Tube. The 0.154-inch body width is the standard SOIC-8 footprint.
This part is sourced through independent distribution and quoted to order against an RFQ. Submit an RFQ through this listing; current pricing and lead time are confirmed at quote time.
A higher-speed alternative is the TLV9362IDDFR, a dual general-purpose op-amp with 10.6 MHz GBW and 25 V/µs slew rate, but it draws 2.6 mA per channel — not a micropower substitute. For a true micropower replacement with similar supply current, look at the TLV9351IDCKR single-channel part (3.5 MHz, 0.6 mA supply), though it is a single, not dual. No pin-compatible drop-in exists at the same supply current.