Skip to main content
Texas Instruments LMC6081AIM/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

LMC6081AIM/NOPB General Purpose Op-Amp, 1.3 MHz

MPNLMC6081AIM/NOPB
End of Life

Texas Instruments LMC6081AIM/NOPB, single general-purpose CMOS op-amp, 1.3 MHz GBW, 1.5 V/µs slew rate, rail-to-rail output, 0.01 pA input bias, 4.5 V to 15.5 V supply, -40°C to 85°C, 8-SOIC package, Tube.

$3.34Ref. price · indicative, final on quote
LMC6081AIM/NOPB datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMC6081AIM/NOPB Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset150 µV
Voltage - supply span15.5 V
Current - supply550µA
Current - input bias0.01 pA
Current - output (Channel)34 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1.3 MHz
PackageTube
Slew rate1.5V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

What this op-amp brings to the board

The Texas Instruments LMC6081AIM/NOPB is a single general-purpose CMOS op-amp in an 8-SOIC package. It delivers a gain-bandwidth product of 1.3 MHz and a slew rate of 1.5 V/µs, with rail-to-rail output swing. Supply range spans 4.5 V to 15.5 V.

Supply voltage and temperature — fit for industrial control

Operating temperature covers -40°C to 85°C.

Input bias current — the spec that decides the application

Input bias current is 0.01 pA. Gain bandwidth product is 1.3 MHz.

Package and handling

Supplied in a Tube (the /NOPB suffix confirms ROHS3 compliance — no lead, no brominated flame retardant). The 8-SOIC footprint is standard; no board respin needed if replacing an existing SOIC-8 op-amp. Surface-mount only — no through-hole variant exists for this order code.

Frequently asked questions

Where can I buy LMC6081AIM/NOPB and get a price?

This part is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing — stock levels and per-unit cost are confirmed at quote time, not listed here.

Can LMC6081AIM/NOPB operate at 3.3 V?

No. The minimum supply voltage is 4.5 V, so a 3.3 V rail is below the operating range. Use a 5 V or higher supply.

What is the difference between LMC6081AIM and LMC6081AIM/NOPB?

The /NOPB suffix indicates ROHS3 compliance (no lead, no brominated flame retardant). The base LMC6081AIM may have an earlier ROHS status; the /NOPB variant is the current, fully compliant version.

What is the replacement or equivalent for LMC6081AIM/NOPB?

No direct pin-compatible replacement is listed by TI. For a higher-speed functional alternative in the same CMOS op-amp class, consider the TLV9351IDCKR (3.5 MHz, 20 V/µs, SC-70 package). Verify the package and temperature range for your board.