Skip to main content
Log in
Texas Instruments LMC6062IN — Analog & Data Acquisition

LMC6062IN CMOS Dual Op-Amp, 100 kHz, Rail-to-Rail Output

MPNLMC6062IN
End of Life

Texas Instruments LMC6062IN, LMC® series, dual CMOS operational amplifier, 100 kHz gain bandwidth, 0.035 V/µs slew rate, rail-to-rail output, 4.5 V to 15.5 V supply, 8-DIP through-hole package, industrial temperature -40°C to 85°C.

$1.53Ref. price · indicative, final on quote
Texas Instruments LMC6062IN datasheet (PDF)
Packaging8-DIP (0.300", 7.62mm)
RoHSRoHS non-compliant
SeriesLMC®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMC6062IN specifications
ParameterValue
SeriesLMC®
Output typePush-Pull, Rail-to-Rail
MountingThrough Hole
Amplifier typeCMOS
Voltage - input offset100 µV
Voltage - supply span15.5 V
Current - supply40µA (x2 Channels)
Current - input bias0.01 pA
Current - output (Channel)35 mA
Operating temperature-40°C ~ 85°C (TJ)
Gain bandwidth product100 kHz
PackageBulk
Slew rate0.035V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

100 kHz GBP, 0.01 pA bias — the precision low-frequency amplifier

The LMC6062IN: The 0.01 pA typical input bias current is the headline parameter that sets it apart from general-purpose bipolar or JFET-input amplifiers; in a high-impedance sensor interface, that leakage floor directly determines the achievable resolution.

The LMC6062IN operates from a single supply as low as 4.5 V up to a maximum of 15.5 V.

Industrial temperature grade and through-hole package

The 8-pin DIP package (0.300" width, 7.62 mm pitch) and the 8-PDIP supplier package are through-hole only — the mounting type is listed as through hole.

Active lifecycle and RoHS note

The RoHS compliance status is listed as non-compliant. The series is LMC®, and the manufacturer is Texas Instruments.

Frequently asked questions

Does LMC6062IN have rail-to-rail output?

Yes, the output type is push-pull, rail-to-rail, meaning the output can swing within millivolts of both the positive and negative supply rails. This is especially useful in low-voltage single-supply circuits to maximize dynamic range.

What is the input bias current of LMC6062IN?

The typical input bias current is 0.01 pA (10 fA), which is exceptionally low for a CMOS amplifier. This makes the LMC6062IN suitable for high-impedance sensor interfaces, photodiode amplifiers, and precision integrators where leakage current would otherwise dominate the error budget.