Skip to main content
Log in
LMC6041IM-NOPB

LMC6041IM/NOPB Texas Instruments Op Amp, 75 kHz, 0.02 V/µs

MPNLMC6041IM/NOPB
End of Life

Texas Instruments LMC6041IM/NOPB, general-purpose op amp, single circuit, 75 kHz gain bandwidth, 0.02 V/µs slew rate, 18 µA supply, rail-to-rail output, 8-SOIC package, -40°C to 85°C.

$2.9Ref. price · indicative, final on quote
Texas Instruments LMC6041IM/NOPB datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMC6041IM/NOPB specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span15.5 V
Current - supply18µA
Current - input bias0.002 pA
Operating temperature-40°C ~ 85°C
Gain bandwidth product75 kHz
PackageTube
Slew rate0.02V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Micropower op-amp for battery and sensor front-ends

Supply voltage range and operating conditions

The LMC6041IM/NOPB operates from a single supply span of 4.5 V to 15.5 V.

Package, markings, and provenance checks

This part ships in Tube (the /NOPB suffix denotes lead-free / ROHS3-compliant plating, per TI's standard marking). The 8-SOIC body is 3.90 mm wide, with a supplier device package of 8-SOIC. When inspecting incoming stock, verify the laser-etched date code and top-mark consistency against TI's published marking layout for the LMC6041IM/NOPB — the absence of the /NOPB suffix on the part marking itself is normal (TI encodes lead-free compliance in the orderable code, not the package marking), but the date-code font and orientation should match TI's SOIC-8 standard. Any sanded or re-marked surface on an active-production part is a red flag.

Frequently asked questions

Can LMC6041IM/NOPB be used in battery-powered circuits?

Yes. With an 18 µA supply current and 0.002 pA input bias current, the LMC6041IM/NOPB is well suited for battery-powered sensor conditioning and portable instrumentation where low quiescent draw is critical.

What is the difference between LMC6041IM and LMC6041IM/NOPB?

The /NOPB suffix indicates lead-free / ROHS3-compliant plating per TI's ordering code. The electrical specifications and package are identical between the two orderable variants.

What is the typical application of LMC6041IM/NOPB?

Typical applications include battery-powered instrumentation, portable medical devices, low-frequency sensor conditioning (thermocouples, strain gauges, photodiodes), and general-purpose signal buffering where the 75 kHz gain-bandwidth and 0.02 V/µs slew rate are adequate.