Skip to main content
Texas Instruments LMC6041AIMX/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

LMC6041AIMX/NOPB General Purpose Op-Amp, 75 kHz, 0.02 V/µs

MPNLMC6041AIMX/NOPB
End of Life

Texas Instruments LMC6041AIMX/NOPB, General Purpose CMOS op-amp, 1 circuit, Rail-to-Rail output, 75 kHz GBW, 0.02 V/µs slew, 18 µA supply, 8-SOIC, -40°C to 85°C.

$2.31Ref. price · indicative, final on quote
LMC6041AIMX/NOPB datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMC6041AIMX/NOPB Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span15.5 V
Current - supply18µA
Current - input bias0.002 pA
Operating temperature-40°C ~ 85°C
Gain bandwidth product75 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.02V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Single-supply precision for low-power sensor interfaces

The Texas Instruments LMC6041AIMX/NOPB is a single CMOS general-purpose op-amp in an 8-SOIC package. It draws just 18 µA of supply current while delivering rail-to-rail output swing — meaning it can run for months on a small battery in a remote sensor node. Input bias current is 0.002 pA, so it won't load a high-impedance source like a photodiode or pH electrode. The gain-bandwidth product is 75 kHz with a 0.02 V/µs slew rate, which limits this part to DC and low-frequency signals; it is not for audio or fast ADC drive. Supply range is 4.5 V to 15.5 V single supply, and the operating temperature covers -40°C to 85°C, suiting it for industrial control, outdoor telecom, and portable instrumentation.

Slew rate and bandwidth — what they mean for your signal chain

Slew rate is 0.02 V/µs. The 75 kHz GBW confirms this is a precision DC amplifier, not a wideband buffer.

Frequently asked questions

What is the slew rate of the LMC6041AIMX/NOPB?

The slew rate is 0.02 V/µs. This limits the part to low-frequency signals — roughly 3 kHz maximum for a 1 V peak-to-peak sine wave before distortion.

Can LMC6041AIMX/NOPB operate from a single supply?

Yes. The rail-to-rail output and 4.5 V to 15.5 V supply range mean it works from a single positive supply without a negative rail.