Skip to main content
Texas Instruments LMC6036IMX — Logic ICs
Texas Instruments

LMC6036IMX CMOS Quad Op-Amp, 1.4 MHz, AEC-Q100

MPNLMC6036IMX
End of Life

Texas Instruments LMC6036IMX, Automotive AEC-Q100, CMOS quad operational amplifier, 1.4 MHz gain bandwidth, 1.5 V/µs slew rate, 2 V to 15.5 V supply, rail-to-rail output, 14-SOIC package.

$0.95Ref. price · indicative, final on quote
LMC6036IMX datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LMC6036IMX Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Output typeDifferential, Rail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset500 µV
Voltage - supply span15.5 V
Current - supply1.3mA (x4 Channels)
Current - input bias0.02 pA
Current - output (Channel)8 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1.4 MHz
PackageBulk
Slew rate1.5V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad CMOS op-amp with AEC-Q100 screening

The LMC6036IMX: The input bias current is rated at 0.02 pA, which preserves accuracy in high-impedance signal paths such as exhaust gas oxygen sensors or pressure transducer bridges. Total supply current for all four amplifiers is 1.3 mA, making it a reasonable choice for modules where thermal budget is constrained.

The 2 V minimum supply allows operation from a 3.3 V rail with headroom for the output stage. The 15.5 V maximum covers nominal 12 V automotive battery lines, though the designer should verify margin against load-dump transients if no external clamp is present.

Package and mounting — 14-SOIC footprint

The supplier device package is 14-SOIC.

Frequently asked questions

Does the LMC6036IMX require external compensation?

As a CMOS operational amplifier with a gain bandwidth product of 1.4 MHz, the LMC6036IMX is internally compensated for unity-gain stability. No external compensation capacitor is required for closed-loop gains of 1 or higher.

What is a good replacement for the LMC6036IMX?

A direct functional replacement would need to be a quad CMOS op-amp with AEC-Q100 qualification, rail-to-rail output, and a similar supply range. Verify pin compatibility and parametric fit before substituting.