Skip to main content
Log in
LMC6032IMX-NOPB

Texas Instruments LMC6032IMX/NOPB, CMOS Dual Op-Amp, 1.4 MHz

MPNLMC6032IMX/NOPB
End of Life

Texas Instruments LMC6032IMX/NOPB, LMC® series, CMOS dual operational amplifier, 1.4 MHz gain bandwidth, 1.1 V/µs slew rate, 4.75 V to 15.5 V supply, 8-SOIC package, -40°C to 85°C.

$1.15Ref. price · indicative, final on quote
Texas Instruments LMC6032IMX/NOPB datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesLMC®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMC6032IMX/NOPB specifications
ParameterValue
SeriesLMC®
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset1 mV
Voltage - supply span15.5 V
Current - supply750µA (x2 Channels)
Current - input bias0.04 pA
Current - output (Channel)40 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1.4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.1V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Signal-chain fit for precision battery-powered or multi-stage filters

The LMC6032IMX/NOPB: With a supply span from 4.75 V to 15.5 V, it runs on a single lithium-ion cell or split rails, and the 750 µA per-channel quiescent current keeps the thermal footprint low in tightly packed 8-SOIC layouts.

Parametric anchors for the BOM decision

Input bias current is 0.04 pA typical — this is the CMOS gate-leakage floor, allowing direct connection to high-impedance sources like pH probes or photodiode transimpedance stages without an external buffer. The industrial temperature range spans -40°C to 85°C, covering most factory-floor and outdoor enclosure environments short of extended under-hood automotive.

Lifecycle and supply posture

No stock-holding claim — confirmed per inquiry.

Frequently asked questions

What is the gain bandwidth product of LMC6032?

The gain bandwidth product is 1.4 MHz, with a slew rate of 1.1 V/µs — suitable for audio-band filtering, slow-scan data acquisition, and control-loop compensation.

What is the output current capability of LMC6032IMX/NOPB?

Each of the two channels can source or sink 40 mA, sufficient to drive the feedback network, a moderate ADC input, or short cable runs without an external buffer.

Where can I buy LMC6032IMX/NOPB with stock?

No stock-holding claim — confirmed per inquiry.

What are the common alternatives to LMC6032IMX/NOPB?

A parametric peer is the OPA4374AIPWT, a CMOS quad op-amp with 6.5 MHz GBW and 5 V/µs slew rate in a TSSOP-14 package, offering higher bandwidth and rail-to-rail output but in a quad-channel, different footprint — board layout change required.