Quad op-amp with 80 MHz GBW and 30 V/µs slew rate
It features rail-to-rail output swing, drawing 1.6 mA per channel quiescent current.
The 80 MHz gain-bandwidth product sets the usable closed-loop gain bandwidth: at a gain of 10, the -3 dB point sits near 8 MHz. Combined with the 30 V/µs slew rate, the LM6154BCM can handle fast pulse edges and moderate-frequency waveforms without excessive slew-induced distortion. For a ±5 V output swing, the slew rate supports a full-power bandwidth of roughly 950 kHz — enough for video or high-speed ADC driver stages.
Each of the four channels can source or sink 16.9 mA, which is adequate for driving ADC inputs, cable back-terminations, or low-impedance loads in the 1 kΩ to 10 kΩ range. The rail-to-rail output stage maximizes dynamic range at low supply voltages.
The 1.27 mm pitch gives good clearance for manual soldering and inspection.