Skip to main content
LM4991MA-NOPB

LM4991MA/NOPB TI Boomer Class AB Amp, 1.5W x 1 @ 8Ω

MPNLM4991MA/NOPB
End of Life

Texas Instruments Boomer® series, Class AB audio amplifier, LM4991MA/NOPB, 1-Channel (Mono), 1.5W x 1 @ 8Ohm, 2.2V ~ 5.5V supply, 8-SOIC package, Tube.

$1.8Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesBoomer®
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LM4991MA/NOPB specifications
ParameterValue
TypeClass AB
SeriesBoomer®
Output type1-Channel (Mono)
MountingSurface Mount
Voltage2.2V ~ 5.5V
Max output power x channels @ load1.5W x 1 @ 8Ohm
Operating temperature-40°C ~ 85°C (TA)
PackageTube
FeaturesDepop, Shutdown, Thermal Protection
Case8-SOIC (0.154\", 3.90mm Width)

Product details

8-SOIC mono audio amp with depop and thermal protection

The LM4991MA/NOPB is a Texas Instruments Boomer® series Class AB audio amplifier delivering 1.5W into an 8Ω load from a single mono channel. Supply voltage spans 2.2V to 5.5V, covering single-cell Li-Ion through 5V logic rails. On-chip depop circuitry suppresses turn-on/turn-off clicks, and the shutdown pin lets a microcontroller gate the amplifier current to near-zero when the audio channel is idle. Thermal protection folds back output drive if the die temperature exceeds the safe operating limit, protecting the speaker load and the amplifier itself during a sustained fault.

Active production and compliance posture

The Tube packaging (standard 8-SOIC carrier) aligns with pick-and-place feeder requirements for medium-volume assembly.

Frequently asked questions

What is the output power of the LM4991MA/NOPB into an 8Ω load?

The LM4991MA/NOPB delivers 1.5W into an 8Ω speaker from a single mono channel. This rating is typical at the nominal supply voltage; actual output depends on the supply rail and the thermal impedance of the PCB copper pour under the SOIC package.