Skip to main content
Texas Instruments LM4808MM/NOPB — Logic ICs

LM4808MM/NOPB Class AB Stereo Headphone Amp, 150mW

MPNLM4808MM/NOPB
End of Life

Texas Instruments Boomer® LM4808MM/NOPB, Class AB stereo headphone amplifier, 150mW x 2 into 16Ω, 2V-5.5V supply, 8-VSSOP package, -40°C to 85°C.

$1.16Ref. price · indicative, final on quote
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LM4808MM/NOPB Technical Specifications
ParameterValue
TypeClass AB
SeriesBoomer®
Output typeHeadphones, 2-Channel (Stereo)
Mounting typeSurface Mount
Voltage2V ~ 5.5V
Max output power x channels @ load150mW x 2 @ 16Ohm
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesDepop
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)

Product details

What this Boomer® stereo amp delivers

The Texas Instruments LM4808MM/NOPB is a Class AB stereo headphone amplifier from the Boomer® series, delivering 150mW per channel into a 16Ω load. The 8-VSSOP package keeps the board footprint small, and the depop feature suppresses turn-on clicks that would otherwise annoy the listener.

The 150mW per channel into 16Ω is enough to drive most consumer headphones to a comfortable listening level; if you are driving higher-impedance loads like 32Ω headphones, expect roughly half the power — still adequate for portable use. The Class AB topology gives clean audio with low crossover distortion, which matters for headphone outputs where the listener is close to the speaker.

Package and storage note

The LM4808MM/NOPB comes in an 8-VSSOP package (3.00mm width), surface-mount only.

Lifecycle and sourcing

The Boomer® series has been around for years, so second-source options are limited — this is a single-source part from TI, but the active status means no near-term supply risk.

Frequently asked questions

What is the output power of LM4808MM/NOPB?

It delivers 150mW per channel into a 16Ω load. Into 32Ω headphones, expect roughly half that power, still sufficient for portable use.

Can LM4808MM/NOPB drive 32 ohm headphones?

Yes, it can drive 32Ω headphones, though the output power will be lower than the 150mW rating into 16Ω. Typical output into 32Ω is around 75mW per channel, which is adequate for most portable headphone applications.