It operates as a shunt (two-terminal) reference, meaning it sinks current through a bias resistor from a higher supply rail — no separate supply pin needed. The 15 mA maximum output current and 80 µA minimum cathode current define the bias resistor range: choose the resistor so the total current (load plus reference) stays between 80 µA and 15 mA over all conditions. The 35 µVrms noise (10 Hz to 10 kHz) is low enough for 12-bit ADC references in industrial control loops. The SC-70-5 package (also listed as 5-TSSOP or SOT-353) fits tight layouts on mixed-signal boards.
Temperature coefficient and operating range
That is adequate for general-purpose 8- to 12-bit accuracy but not for high-precision metrology — a 20 ppm/°C series reference would hold tighter over temperature.
Supplied in the SC-70-5 (SOT-353) surface-mount package, the part requires a compact five-pin footprint. The supplier device package is SC-70-5; the alternate case codes (5-TSSOP, SC-70-5, SOT-353) all refer to the same physical outline.