Skip to main content
Texas Instruments LM3S8733-IQC50-A2 — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments LM3S8733-IQC50-A2 ARM Cortex-M3 MCU, 50MHz

MPNLM3S8733-IQC50-A2
Obsolete

Texas Instruments Stellaris ARM Cortex-M3S 8000 series, LM3S8733-IQC50-A2, 32-bit single-core MCU, 50MHz, 128KB FLASH, 64KB RAM, 100-LQFP, 2.25V–2.75V supply, -40°C–85°C.

$18.3900Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM3S8733-IQC50-A2 specifications
ParameterValue
SeriesStellaris® ARM® Cortex®-M3S 8000
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.25V ~ 2.75V
Operating temperature-40°C~85°C(TA)
Speed50MHz
PackageTray
RAM size64K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityCANbus, Ethernet, I²C, IrDA, Microwire, SPI, SSI, UART/USART
Number of i (O)35
Core processorARM® Cortex®-M3
Case100-LQFP
Data convertersA/D 4x10b
Program memory size128KB (128K x 8)

Product details

128 KB Flash, 64 KB RAM — what the memory map supports

The 128 KB program Flash is sized for a single firmware image with room for a modest bootloader, while the 64 KB SRAM handles real-time data buffers and stack. That combination fits applications like a CAN-to-Ethernet gateway or a motor-controller state machine that doesn't need external memory.

Connectivity peripherals: CAN, Ethernet, and serial interfaces

The Ethernet MAC with dedicated DMA is the standout — it enables low-cost embedded web servers or industrial protocol gateways without an external PHY controller. The CAN 2.0B controller suits automotive or factory-floor networking.

New-production allocations are gone; any available units are from remaining inventory or the surplus channel. The last-time-buy window has closed, so procurement should verify date-code provenance and plan for a migration if a production run needs ongoing supply.

Sourcing posture for this obsolete part

Buyers should be prepared to evaluate date codes and condition, as this is strictly a surplus-channel part.

Frequently asked questions

Is LM3S8733-IQC50-A2 obsolete?

Yes, Texas Instruments lists the LM3S8733-IQC50-A2 as obsolete.

What is a good equivalent for LM3S8733-IQC50-A2?

The Stellaris family has been superseded by the TM4C series from TI, but those parts require a design migration and are not direct substitutes.

What is LM3S8733-IQC50-A2's listed speed?

The core runs at 50 MHz.