Texas Instruments Stellaris ARM Cortex-M3S 600 series LM3S613-IQN50-C2, 32-bit single-core MCU, 50 MHz, 32 KB Flash, 8 KB SRAM, 32 I/O, I²C/SPI/SSI/UART, 4x10-bit ADC, -40°C to 85°C, 48-LQFP.
| Parameter | Value |
|---|---|
| Series | Stellaris® ARM® Cortex®-M3S 600 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 50MHz |
| Package | Tray |
| RAM size | 8K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I²C, Microwire, SPI, SSI, UART/USART |
| Number of i (O) | 32 |
| Core processor | ARM® Cortex®-M3 |
| Case | 48-LQFP |
| Data converters | A/D 4x10b |
| Program memory size | 32KB (32K x 8) |
The Texas Instruments LM3S613-IQN50-C2 is a 32-bit ARM Cortex-M3 microcontroller from the Stellaris 600 series, clocked at 50 MHz.
The LM3S613-IQN50-C2 is officially obsolete per Texas Instruments. No last-time-buy window remains open; the part is available only through independent surplus and broker channels.
No. Because the LM3S613-IQN50-C2 is obsolete, it should not be selected for new designs. Use an active Cortex-M3 or Cortex-M4 MCU with similar peripheral set and package.
The LM3S613-IQN50-C2 uses a 48-pin LQFP package. The pinout is documented in the Texas Instruments datasheet for the Stellaris LM3S613 device. Key signals include 32 GPIOs, a 4-channel 10-bit ADC, and serial interfaces on dedicated pins.