Skip to main content
Texas Instruments LM3S2739-IBZ50-A2T — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments LM3S2739-IBZ50-A2T MCU, 50MHz, 128KB Flash

MPNLM3S2739-IBZ50-A2T
NRND

Texas Instruments Stellaris ARM Cortex-M3S 2000 series, LM3S2739-IBZ50-A2T, 32-bit single-core MCU at 50MHz, 128KB FLASH, 64KB SRAM, 56 I/O, CAN/UART/SPI/SSI/QEI, 108-LFBGA, -40°C to 85°C, 2.25–2.75V, NRND.

$15.6998Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM3S2739-IBZ50-A2T specifications
ParameterValue
SeriesStellaris® ARM® Cortex®-M3S 2000
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.25V ~ 2.75V
Operating temperature-40°C~85°C(TA)
Speed50MHz
PackageTape & Reel (TR)
RAM size64K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityCANbus, I²C, IrDA, Microwire, QEI, SPI, SSI, UART/USART
Number of i (O)56
Core processorARM® Cortex®-M3
Case108-LFBGA
Data convertersA/D 4x10b
Program memory size128KB (128K x 8)

Product details

NRND — last-time-buy planning required

A last-time-buy window may already be open or imminent depending on the customer's contract terms with TI.

Program memory is 128 KB of on-chip Flash, backed by 64 KB of SRAM — enough headroom for moderate control firmware and a real-time data buffer for sensor fusion or protocol bridging. The core processor is the ARM Cortex-M3, which includes a hardware single-cycle multiply and a Nested Vectored Interrupt Controller for deterministic interrupt latency. Four 10-bit ADC channels are integrated for analog input.

Packaged in a 108-LFBGA (10x10 mm body, 108 balls), the LM3S2739-IBZ50-A2T is a surface-mount device. The 56 I/O lines are routed through the BGA array, which typically requires a four-layer PCB with microvias for fanout. Any interface to 3.3 V logic or peripherals needs level translation.

Frequently asked questions

Is LM3S2739-IBZ50-A2T obsolete?

This means TI will not qualify it into new designs, but it remains available for existing production through the LTB and surplus channels.

Is LM3S2739-IBZ50-A2T compatible with LM3S2739-IBZ50?

The base product number LM3S2739 is shared, but the suffix -IBZ50-A2T indicates a specific variant. The -IBZ50 suffix typically denotes the 108-BGA package and 50 MHz speed grade. The -A2T suffix may indicate a specific revision or tape-and-reel packaging. Footprint and electrical compatibility should be verified against the datasheet for the exact suffix; TI's PCN history would confirm any silicon revision differences.