Skip to main content
Texas Instruments LM3S102-IQN20-C2T — Microcontrollers & Processors (MCU / MPU / DSP)

LM3S102-IQN20-C2T Stellaris ARM Cortex-M3 MCU, 20 MHz

MPNLM3S102-IQN20-C2T
NRND

Texas Instruments Stellaris ARM Cortex-M3S 100 series LM3S102-IQN20-C2T, 32-bit ARM Cortex-M3 MCU, 20 MHz, 8 KB Flash, 2 KB SRAM, 18 I/O, I²C/SPI/UART, 48-LQFP, -40°C to 85°C.

$3.9772Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM3S102-IQN20-C2T specifications
ParameterValue
SeriesStellaris® ARM® Cortex®-M3S 100
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))3V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed20MHz
PackageTape & Reel (TR)
RAM size2K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, Microwire, SPI, SSI, UART/USART
Number of i (O)18
Core processorARM® Cortex®-M3
Case48-LQFP
Program memory size8KB (8K x 8)

Product details

Typical applications include sensor interfaces, simple control loops, and low-speed communication bridges in factory automation or building control equipment.

Memory footprint and interface set

With 8 KB of Flash and 2 KB of SRAM, firmware must be lean — a modest bootloader plus a few hundred lines of C. The 18 I/O pins and the I²C/SPI/UART peripherals are enough to aggregate data from a handful of digital sensors or control a few relays.

NRND — plan your replacement now

This means the manufacturer has flagged it for eventual discontinuation; new designs should not start with this part. For existing BOMs, the part remains available through independent distribution while supply lasts. A direct pin-compatible replacement from the same Stellaris family is not listed in the official record, so a redesign or a cross-ship evaluation of a similar Cortex-M3 MCU will be needed for production continuity.

Frequently asked questions

What is the replacement or equivalent for LM3S102-IQN20-C2T?

No official pin-compatible replacement is listed in the manufacturer's records. A redesign using a similar Cortex-M3 MCU from the Stellaris family or a current-generation ARM MCU will be required. Contact us for cross-reference assistance.

Can LM3S102-IQN20-C2T operate at 3.3V?

Yes, the supply voltage range is 3 V to 3.6 V, so 3.3 V operation is within spec. Power consumption depends on the clock speed and peripheral usage; the 20 MHz core draws current typical of a Cortex-M3 at that frequency.

What is the programming interface for LM3S102-IQN20-C2T?

The part supports standard ARM Serial Wire Debug (SWD) and JTAG for programming and debugging, accessible through the 48-LQFP pins. The internal oscillator can be used, so no external clock is required for programming.