Skip to main content
Log in
LM358DRG4

Texas Instruments LM358DRG4 Dual Op-Amp, 700 kHz, 0.3 V/µs

MPNLM358DRG4
End of Life

Texas Instruments LM358DRG4, dual general-purpose operational amplifier, 700 kHz gain bandwidth product, 0.3 V/µs slew rate, 500 µA per channel supply current, 3 V to 30 V supply range, 0°C to 70°C, 8-SOIC package.

$0.9300Ref. price · indicative, final on quote
Texas Instruments LM358DRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM358DRG4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply500µA (x2 Channels)
Current - input bias20 nA
Current - output (Channel)40 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product700 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.3V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

700 kHz GBP — where this dual op-amp fits the bill

Each channel draws 500 µA of supply current, making this a low-power choice for multi-channel boards where the op-amp budget shares a rail with the MCU or ADC reference.

3 V to 30 V single-supply flexibility

The LM358DRG4 operates from a single supply spanning 3 V to 30 V, or a split supply of ±1.5 V to ±15 V. This wide compliance lets the same part serve 5 V logic-rail circuits and 24 V industrial sensor interfaces without a second op-amp variant on the BOM. Input offset voltage is rated at 3 mV typical, and input bias current at 20 nA — adequate for precision work above the microvolt level, but not a chopper-stabilized grade.

Commercial temperature grade — indoor and office equipment only

For motor drives, outdoor telecom, or under-hood automotive applications, the industrial-temperature LM358 variants (e.g., LM358DR or LM358P with -40°C to 85°C or 125°C ratings) are the correct choice.

Frequently asked questions

What is the closest pin-compatible alternative to LM358DRG4?

The LM358DRG4 is a specific tape-and-reel variant of the industry-standard LM358 dual op-amp. Any LM358 in an 8-SOIC package — such as the LM358DR, LM358D, or LM358P (DIP) — is functionally identical and pin-compatible, differing only in packaging, temperature range, or tape/reel format. The base product number is LM358.

What is the slew rate of LM358DRG4?

The LM358DRG4 has a slew rate of 0.3 V/µs. This limits large-signal bandwidth; for applications requiring faster edge rates, consider a higher-slew-rate op-amp such as the LM6172 or OPAx192 family.