Skip to main content
Log in
Texas Instruments LM358APWR — Analog & Data Acquisition

LM358APWR General Purpose Op-Amp, 700 kHz, 0.3 V/µs, 8-TSSOP

MPNLM358APWR
Active

Texas Instruments LM358APWR, General Purpose Amplifier, 2 Circuits, 700 kHz Gain Bandwidth, 0.3V/µs Slew Rate, 3V~30V Supply, 0°C~70°C, Surface Mount, 8-TSSOP.

$0.4800Ref. price · indicative, final on quote
Texas Instruments LM358APWR datasheet (PDF)
Packaging8-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LM358APWR specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset2 mV
Voltage - supply span30 V
Current - supply500µA (x2 Channels)
Current - input bias15 nA
Current - output (Channel)40 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product700 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.3V/µs
Case8-TSSOP (0.173\", 4.40mm Width)
Number of circuits2

Product details

The Texas Instruments LM358APWR is a dual-channel, general-purpose operational amplifier in an 8-TSSOP package. It delivers a gain bandwidth product of 700 kHz and a slew rate of 0.3 V/µs, drawing 500 µA per amplifier from a 3 V to 30 V supply. This is the classic LM358 architecture — a workhorse for non-critical signal conditioning, sensor buffering, and DC-level shifting in commercial-temperature (0°C to 70°C) equipment. The 8-TSSOP footprint saves board space compared to the older SOIC-8, but the pinout is the same, so it drops into existing LM358 layouts without a PCB change.

For dual-sourcing resilience, the LM358 family has multiple package variants and second-source equivalents from other manufacturers — the base LM358 design is a JEDEC-standard part, so qualifying an alternate (e.g., an LM358 in SOIC-8) is straightforward if your board can accommodate the larger footprint. The 8-TSSOP variant is the space-saving option for new designs.

Frequently asked questions

Is LM358APWR obsolete?

No. The LM358APWR is listed as Active in production. There is no end-of-life notice or last-time-buy schedule in effect.

What is the difference between LM358APWR and LM358P?

The LM358APWR is the surface-mount 8-TSSOP variant; the LM358P is the through-hole DIP-8 version. Both share the same LM358 core — 700 kHz GBW, 0.3 V/µs slew rate, 3 V to 30 V supply — but the TSSOP package saves board area and is suited for reflow assembly. If your board uses DIP-8 sockets, the LM358APWR will not fit without an adapter.

Can LM358APWR replace LM358P?

Electrically yes — same pinout, same supply range, same performance. Mechanically no — the TSSOP footprint is different from the DIP-8. A PCB redesign or a DIP-to-TSSOP adapter board is required.

What is the equivalent part for LM358APWR?

Any standard LM358 in an 8-pin surface-mount package (SOIC-8, MSOP-8) is a functional equivalent. The TLV9351IDCKR (single) and TLV9362IDDFR (dual) are newer CMOS alternatives with rail-to-rail output, higher bandwidth (3.5 MHz and 10.6 MHz respectively), and wider temperature range (-40°C to 125°C), but they are not pin-compatible — verify the pinout before substituting.