Skip to main content
Log in
Texas Instruments LM358APG4 — Analog & Data Acquisition

TI LM358APG4 General Purpose Op-Amp, 700 kHz, DIP-8

MPNLM358APG4
End of Life

Texas Instruments LM358APG4, general purpose dual operational amplifier, 700 kHz gain bandwidth, 0.3 V/µs slew rate, 3 V to 30 V supply, 8-DIP through-hole package, 0°C to 70°C operating temperature.

Texas Instruments LM358APG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM358APG4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset2 mV
Voltage - supply span30 V
Current - supply500µA (x2 Channels)
Current - input bias15 nA
Current - output (Channel)40 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product700 kHz
PackageTube
Slew rate0.3V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Parametric profile — speed, drive, and bias

Gain bandwidth product is 700 kHz with a slew rate of 0.3 V/µs — sufficient for audio-band processing and low-frequency control loops, but not for video or high-speed data acquisition. Input bias current is 15 nA typical and input offset voltage is 2 mV typical, both adequate for non-critical DC accuracy. Supply current per amplifier is 500 µA, keeping the total quiescent draw under 1 mA for the dual package.

Package and rework — DIP-8 through-hole

The 8-DIP (0.300-inch, 7.62 mm pitch) through-hole package is a technician-friendly form factor: easy to hand-solder, easy to probe, and forgiving during rework. The wide pin spacing and 0.100-inch row pitch mean it fits standard prototyping boards and sockets.

It is RoHS-compliant and lead-free, meeting the requirements for current-generation manufacturing.

Frequently asked questions

What is the difference between LM358APG4 and LM358P?

Both are TI dual general-purpose op-amps in DIP-8 with identical electrical specs (700 kHz GBW, 0.3 V/µs slew rate, 3 V to 30 V supply). The LM358APG4 is the lead-free / RoHS-compliant variant; the LM358P is the older tin-lead version. Functionally they are interchangeable, but the LM358APG4 is the preferred choice for new designs requiring RoHS compliance.

What is the typical application for the LM358APG4?

As a general-purpose dual op-amp, it is used in signal conditioning, active filters, sensor buffers, comparator circuits (with external pull-up), and DC gain stages. The wide supply range and low quiescent current suit battery-powered and single-supply designs in consumer, industrial, and office equipment.