Dual op-amp with a 3 V to 30 V supply rail — the BOM-fit baseline
The 3 V minimum supply span lets it run from a single lithium cell or a 3.3 V rail, while the 30 V maximum covers 24 V industrial buses without a secondary regulator.
The 700 kHz gain-bandwidth product sets the usable frequency for a given closed-loop gain: at a gain of 10, the -3 dB point lands near 70 kHz. Input bias current is 15 nA typical, and input offset voltage is 2 mV typical. These are relaxed figures compared to precision op-amps, but entirely sufficient for non-critical DC paths where the signal floor is tens of millivolts or higher. The total supply current for both channels is 500 µA — a key spec for battery-powered or power-budgeted designs.
8-SOIC footprint and Tape & Reel — ready for SMT assembly
The 8-SOIC (0.154-inch body width, 3.90 mm) package is a JEDEC-standard outline with 1.27 mm pin pitch.