The LM358ADGKR is a dual general-purpose op-amp from the industry-standard LM358 family, built for single-supply operation from 3 V up to 30 V. At a closed-loop gain of 10, the -3 dB small-signal bandwidth drops to about 70 kHz, which is still plenty for most industrial sensor interfaces.
Supply range and current budget — where this part saves the rail
The 30 V maximum covers 24 V industrial buses without an extra regulator. Each channel draws 500 µA typical, so both channels together consume 1 mA — that is low enough to leave headroom for the rest of the signal chain in a battery-powered design.
Package choice and temperature grade — fit for the board and the environment
The 8-VSSOP supplier device package measures 3.00 mm × 3.00 mm, roughly half the PCB area of an SOIC-8. That matters when you are squeezing two op-amps into a tight sensor module or a multi-channel data-acquisition front-end. For an outdoor enclosure or under-hood automotive slot, you would step to the industrial-temperature variant of the LM358.
The base product number is LM358, a family that has been in continuous production for decades and is second-sourced by multiple manufacturers.