Skip to main content
Texas Instruments LM3370SDX-3021/NOPB — DC-DC Power Modules

LM3370SDX-3021/NOPB Dual Buck Regulator, 2 MHz, 600 mA

MPNLM3370SDX-3021/NOPB
Obsolete

Texas Instruments LM3370SDX-3021/NOPB dual synchronous buck converter, fixed 1.2V and 3.3V outputs, 600 mA per channel, 2 MHz switching, 2.7V–5.5V input, 16-WSON (5x4) package, -30°C to 85°C.

$1.8200Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM3370SDX-3021/NOPB specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input5.5V
Voltage - output (Min (Fixed))1.2V, 3.3V
Output current600mA
Frequency - switching2MHz
I/O channels2
Operating temperature-30°C~85°C(TA)
PackageTape & Reel (TR)
FunctionStep-Down
TopologyBuck
Case16-WFDFN Exposed Pad
Output configurationPositive
Synchronous rectifierYes

Product details

Dual fixed-output buck in a 5×4 WSON

The LM3370SDX-3021/NOPB: The 5×4 mm WSON package with exposed pad conducts heat into the PCB ground plane. The device operates from -30°C to 85°C ambient.

The 600 mA per-channel rating provides enough headroom for a low-power processor plus its peripheral bus, but designs drawing more than 600 mA on either rail will need a higher-current regulator or an external load switch to share the current. The fixed outputs eliminate the external divider network. The 2 MHz switching frequency works with small inductors.

No last-time-buy date or official successor order code is recorded in the available lifecycle data. This means the part is no longer manufactured or available through the factory channel; any remaining stock is in the independent distribution network. The 5×4 mm WSON package and fixed-output configuration mean that a pin-compatible replacement would need to match the same footprint and voltage settings — no direct cross is confirmed in the available records.

Frequently asked questions

What is the replacement for LM3370SDX-3021/NOPB?

No official replacement or pin-compatible alternative is documented in the available lifecycle records. A substitute would need to match the 16-WSON (5×4) footprint, dual fixed-output configuration, and 2 MHz switching frequency — confirm fit with the original PCB layout before committing.