Quad op-amp for signal conditioning — Last Buy status
Each of the four channels sinks or sources 30 mA, with total supply current of 1.4 mA for all four amplifiers — suited for multi-channel sensor conditioning, active filters, and control-loop signal buffering in commercial-temperature (0°C to 70°C) equipment.
Parametric fit — bandwidth, slew rate, and input offset
The 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate set the small-signal and large-signal frequency ceiling: expect unity-gain closed-loop bandwidth near 1.2 MHz, and full-swing output transients limited to roughly 0.5 V/µs — adequate for audio-band processing and slow-sensor front ends. Input offset voltage is 2 mV typical, input bias current 15 nA — the offset and bias errors are low enough for most single-supply industrial and consumer signal chains without external nulling.