Texas Instruments LM2904VQPWRG4, dual general-purpose operational amplifier, 700 kHz gain bandwidth, 0.3 V/µs slew rate, 3 V to 30 V supply, 500 µA per channel, -40°C to 125°C, 8-TSSOP package.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 500µA (x2 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 40 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 700 kHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.3V/µs |
| Case | 8-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 2 |
Each channel draws 500 µA typical supply current, so the dual package consumes 1 mA total — low enough for loop-powered transmitters and battery-backed sensor modules.
The 3 mV input offset voltage and 20 nA input bias current are typical for this class — adequate for 1% signal-path accuracy in 12-bit systems when the input span is a few volts.
Determines if the part can withstand the intended environment.
Confirms packaging for automated assembly lines.
Critical for power supply compatibility in the design.
Needed for PCB layout and circuit integration.
Required for regulatory and export compliance.
Directly influences procurement decisions and project timelines.