3 V to 32 V single-supply dual op-amp in 8-DSBGA
It delivers a 1 MHz gain-bandwidth product and draws 1 mA supply current per amplifier.
The 1 MHz gain-bandwidth product sets the usable closed-loop bandwidth: at a gain of 10 the -3 dB point is 100 kHz, adequate for thermocouple, strain-gauge, and pressure-bridge conditioning where the signal bandwidth stays below 10 kHz. The 2 mV typical input offset voltage and 45 nA input bias current are standard for a general-purpose bipolar stage — no auto-zero or chopper, so expect a DC error budget of several millivolts at the output. The 40 mA output current per channel can drive a 2 kΩ load to within 1.5 V of the rails, enough for feeding an ADC input or a downstream comparator.
Industrial temperature range and active lifecycle
The product status is active, meaning TI continues to manufacture the LM2904ITPX/NOPB with no announced end-of-life.