Skip to main content
Texas Instruments LM2904DR-P — Analog & Data Acquisition

LM2904DR-P dual general-purpose op-amp, 700 kHz GBW

MPNLM2904DR-P
Active

Texas Instruments LM2904DR-P dual general-purpose op-amp, 700 kHz gain bandwidth, 0.3 V/µs slew rate, 500 µA supply per channel, 8-SOIC package, -40 to 125°C operating range.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM2904DR-P specifications
ParameterValue
Output typePush-Pull
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span26 V
Current - supply500µA (x2 Channels)
Current - input bias20 nA
Current - output (Channel)40 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product700 kHz
PackageBulk
Slew rate0.3V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual op-amp for industrial signal chains

Supply budget and signal bandwidth

Each amplifier draws 500 µA of supply current, keeping the total quiescent draw under 1 mA for the dual package. The 0.3 V/µs slew rate supports signal frequencies up to roughly 50 kHz at full output swing — adequate for most transducer outputs and slow control loops.

Frequently asked questions

What is the gain-bandwidth product of LM2904DR-P?

The gain-bandwidth product is 700 kHz, which defines the usable closed-loop bandwidth for a given gain setting.