Skip to main content
Log in
Texas Instruments LM2904DGKR-JF — Analog & Data Acquisition

Texas Instruments LM2904DGKR-JF Dual Op-Amp, 700 kHz

MPNLM2904DGKR-JF
Active

Texas Instruments LM2904DGKR-JF, dual general-purpose operational amplifier, 700 kHz gain bandwidth, 0.3 V/µs slew rate, 3 V to 26 V supply, push-pull output, -40°C to 125°C, 8-VSSOP package, Bulk.

Texas Instruments LM2904DGKR-JF datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM2904DGKR-JF specifications
ParameterValue
Output typePush-Pull
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span26 V
Current - supply500µA (x2 Channels)
Current - input bias20 nA
Current - output (Channel)30 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product700 kHz
PackageBulk
Slew rate0.3V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

700 kHz GBW, 125°C temp grade — the industrial dual op-amp

It delivers 700 kHz gain bandwidth and a 0.3 V/µs slew rate — enough for sensor buffering, signal conditioning, and control loops in industrial and automotive environments.

3 V to 26 V single-supply — one rail, no regulator

The supply span runs from 3 V up to 26 V, so the same part works on a 3.3 V MCU rail, a 5 V logic bus, or a 24 V industrial loop without a separate supply regulator. Each channel draws 500 µA quiescent current, keeping the total budget at 1 mA for both amplifiers.

Frequently asked questions

Is LM2904DGKR-JF obsolete?

It is safe to specify for new designs and production.

Can LM2904DGKR-JF be used with a single supply?

It works on 3.3 V, 5 V, 12 V, or 24 V rails without a split supply.

What is the difference between LM2904DGKR-JF and LM2904DR?

The LM2904DGKR-JF is in an 8-VSSOP package (3.00 mm width) and supplied in Bulk. The LM2904DR typically comes in an SOIC-8 package on Tape & Reel. Both share the same electrical ratings — 700 kHz GBW, 0.3 V/µs slew rate, 3 V to 26 V supply — so the choice is footprint and packaging logistics.