The gain-bandwidth product of 1.2 MHz sets the usable closed-loop bandwidth. For a gain-of-10 stage, expect a -3 dB point around 120 kHz — fine for filtering PWM tachometer signals or amplifying thermocouple outputs, but not for high-speed ADC drivers. The 0.5 V/µs slew rate limits large-signal response; a 5 V step settles in about 10 µs, which is adequate for low-frequency sensor interfaces but will distort fast edges above 50 kHz.
Input bias current is 10 nA typical, and input offset voltage is 300 µV, both adequate for non-precision signal conditioning.
The 1.27 mm pin pitch leaves room for manual soldering with a fine-tip iron. No moisture sensitivity level is listed, but standard SOIC bake-out at 125°C for 24 hours is safe if the parts have been exposed to ambient humidity.