Texas Instruments LM2904BAQPWRQ1, Automotive AEC-Q100, dual general-purpose op-amp, 1.2 MHz gain bandwidth, 0.5 V/µs slew rate, 3 V to 36 V supply, 8-TSSOP package.
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100 |
| Output type | Push-Pull |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 2 mV |
| Voltage - supply span | 36 V |
| Current - supply | 300µA (x2 Channels) |
| Current - input bias | 10 nA |
| Current - output (Channel) | 30 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.5V/µs |
| Case | 8-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 2 |
The 1.2 MHz gain-bandwidth product supports closed-loop gains up to 100× at 12 kHz, which covers most automotive sensor conditioning — throttle position, pressure transducers, and temperature linearisation.
The AEC-Q100 qualification means each reel carries traceability to the automotive-grade test and burn-in flow, which matters for PPAP submissions and zero-defect programs.
The LM2904BAQPWRQ1 is a pin-compatible upgrade to the industry-standard LM358 in the same 8-pin package, but with AEC-Q100 qualification and a wider supply range up to 36 V. The LM358 is typically rated to 32 V and lacks automotive-grade testing. For a direct replacement in an automotive BOM, the LM2904BAQPWRQ1 is the correct choice.