Texas Instruments Automotive, AEC-Q100 LM2904AVQPWRQ1 dual general-purpose op-amp, 700 kHz GBW, 0.3 V/µs slew rate, 3 V to 26 V supply, 500 µA per channel, 8-TSSOP package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100 |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 26 V |
| Current - supply | 500µA (x2 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 30 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 700 kHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.3V/µs |
| Case | 8-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 2 |
The 8-TSSOP package (4.40 mm width) is surface-mount only — fine-pitch enough that hand-soldering needs a steady iron and flux, but manageable with a hot-air station. The 500 µA per-channel supply current keeps the quiescent draw low for always-on modules like body controllers or battery-monitor front ends.
The slew rate is 0.3 V/µs, which limits the amplifier's large-signal bandwidth but is sufficient for low-frequency sensor and control signals.
The TLV9362IDDFR is a dual general-purpose op-amp in the same AEC-Q100 class with a higher 10.6 MHz GBW and rail-to-rail output, but it draws more supply current (2.6 mA per channel). The TLV9351IDCKR is a single-channel alternative with 3.5 MHz GBW and rail-to-rail output. Neither is a pin-for-pin replacement; verify the package and supply range for your design.