Skip to main content
Log in
Texas Instruments LM2904AVQPWR — Analog & Data Acquisition

TI LM2904AVQPWR General Purpose Op-Amp, 700 kHz, 8-TSSOP

MPNLM2904AVQPWR
Active

Texas Instruments LM2904AVQPWR, General Purpose Amplifier, 2 Circuit, 700 kHz Gain Bandwidth, 0.3V/µs Slew Rate, 3V to 30V Supply, -40°C to 125°C, 8-TSSOP, Surface Mount, Tape & Reel.

$0.6700Ref. price · indicative, final on quote
Texas Instruments LM2904AVQPWR datasheet (PDF)
Packaging8-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LM2904AVQPWR specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span30 V
Current - supply500µA (x2 Channels)
Current - input bias20 nA
Current - output (Channel)40 mA
Operating temperature-40°C~125°C(TA)
Gain bandwidth product700 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.3V/µs
Case8-TSSOP (0.173\", 4.40mm Width)
Number of circuits2

Product details

The Texas Instruments LM2904AVQPWR is a dual-channel, general-purpose operational amplifier in an 8-TSSOP package. The gain-bandwidth product sits at 700 kHz with a 0.3 V/µs slew rate — numbers that tell you this is a micropower part for low-frequency signal conditioning, not a high-speed or video amp.

At 700 kHz gain-bandwidth, a unity-gain buffer has a -3 dB point around 700 kHz.

Supply current and output drive

Each amplifier draws 500 µA quiescent, so the dual package pulls 1 mA total with no load.

Input offset and temperature range

No official second-source alternate is listed in the manufacturer cross-reference.

Frequently asked questions

What is the gain bandwidth product and slew rate of LM2904AVQPWR?

The gain-bandwidth product is 700 kHz and the slew rate is 0.3 V/µs. This combination suits low-frequency signal conditioning below roughly 70 kHz at a gain of 10.

What package does LM2904AVQPWR ship in?

It is supplied in Tape & Reel (TR) or Cut Tape (CT) format. The device package is an 8-TSSOP (0.173", 4.40 mm width) with surface-mount termination.