Texas Instruments LM2904AVQDRRB, dual general-purpose operational amplifier, 700 kHz gain bandwidth, 0.3V/µs slew rate, 3 V to 30 V supply, push-pull output, -40°C to 125°C, 8-SOIC surface-mount package, Bulk delivery.
| Parameter | Value |
|---|---|
| Output type | Push-Pull |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 30 V |
| Current - supply | 500µA (x2 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 40 mA |
| Operating temperature | -40°C ~ 125°C (TA) |
| Gain bandwidth product | 700 kHz |
| Package | Bulk |
| Slew rate | 0.3V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Its 700 kHz gain-bandwidth product and 0.3 V/µs slew rate set the upper bound for signal frequency and output swing rate — fine for sensor conditioning, DC-level shifting, and low-speed feedback loops, but not for audio or fast ADC drivers.
Supply span runs from 3 V to 30 V, so it works on a 5 V logic rail or a 24 V industrial bus without a separate regulator.
No — it carries an Active product status.
The LM2904AVQDRRB is pin-compatible with the industry-standard LM358 dual op-amp and shares the same general-purpose function.