Texas Instruments LM2902QDRQ1, Automotive AEC-Q100, quad general-purpose op-amp, 1.2 MHz gain bandwidth, 0.5 V/µs slew rate, 3 V to 26 V supply, -40°C to 125°C, 14-SOIC.
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100 |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 26 V |
| Current - supply | 1.4mA (x4 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 60 mA |
| Operating temperature | -40°C~125°C |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.5V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
The LM2902QDRQ1: The supply span runs from 3 V minimum to 26 V maximum. Each of the four channels draws 1.4 mA quiescent current for the package.
Gain-bandwidth product is 1.2 MHz, with a slew rate of 0.5 V/µs.
Engineers need pinout, electrical specs, and application info to validate fit in a design.
Buyers need immediate availability to avoid production delays.
Lifecycle status affects long-term supply and replacement planning.
Designers and maintenance techs need alternatives when the part is unavailable or for second sourcing.
Budgeting and cost comparison are critical for procurement decisions.
Pinout verification is essential for PCB layout and troubleshooting.