1.2 MHz GBW, 0.5 V/µs slew — signal conditioning baseline
Four general-purpose op-amps in one 14-TSSOP package. The 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate cover the usual sensor conditioning, active filtering below 100 kHz, and level-shifting tasks in industrial control loops. The 3 V to 26 V supply span means it runs on a single 5 V or 24 V rail without a split supply — handy in PLC analog input stages or motor-drive current-sense circuits.
That 125°C ceiling matters when the PCB sits near a motor housing or inside a sealed outdoor enclosure. The 20 nA input bias current and 3 mV input offset voltage are typical for this family — adequate for 8- to 10-bit accuracy paths without trimming.
14-TSSOP — footprint and reel logistics
Surface-mount in a 14-TSSOP body (4.40 mm width, 0.65 mm pitch).