Supply flexibility and temperature range for under-hood use
Each amplifier delivers up to 30 mA output current, enough to drive small relays, indicator LEDs, or the analog input of a downstream ADC.
LM2902KVQDRG4Q1 Texas Instruments Automotive Quad Op-Amp
MPNLM2902KVQDRG4Q1
End of Life
Texas Instruments LM2902KVQDRG4Q1, Automotive AEC-Q100, General Purpose Amplifier, 4 Circuits, 1.2 MHz Gain Bandwidth, 0.5 V/µs Slew Rate, 3 V to 30 V Supply, -40°C to 125°C, 14-SOIC Package.
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100 |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA (x4 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 30 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR) |
| Slew rate | 0.5V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
Product details
Frequently asked questions
Is LM2902KVQDRG4Q1 automotive qualified?
Yes, it is listed under the Automotive, AEC-Q100 series, meaning it meets the stress and reliability qualification for automotive-grade ICs.
Can LM2902KVQDRG4Q1 be replaced by LM2902DR or another standard version?
The standard LM2902DR is pin-compatible and shares the same quad op-amp architecture, but it lacks the AEC-Q100 automotive qualification. For non-automotive designs the standard version is a drop-in; for automotive BOM lines the KV-grade is required.
Is LM2902KVQDRG4Q1 RoHS compliant?
The part is listed with a Tape & Reel package code that typically indicates RoHS compliance for Texas Instruments SOIC products, but the specific RoHS status should be confirmed on the manufacturer's certification at order time.