Texas Instruments Automotive, AEC-Q100 series, LM2902KAVQPWR, General Purpose Amplifier, 4 Circuit, 1.2 MHz, 0.5V/µs, 3 V to 30 V, -40°C to 125°C, 14-TSSOP.
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100 |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA (x4 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 30 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.5V/µs |
| Case | 14-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 4 |
The LM2902KAVQPWR: Its 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate cover the typical signal-conditioning range for sensor buffers, active filters, and level shifters. The 3 V to 30 V supply span lets it run off an unregulated battery line or a regulated rail without a separate LDO.
No — the product status is active. There is no end-of-life notice, so it remains available for ongoing production and new designs.
The base product number is LM2902, so this variant shares the same quad op-amp core. The KAVQPWR suffix indicates the AEC-Q100 qualified version in a 14-TSSOP package on Tape & Reel. Electrically it is the same amplifier — the difference is the automotive qualification and the package form factor.