Skip to main content
Log in
Texas Instruments LM2902DBR — Analog & Data Acquisition

LM2902DBR Texas Instruments Op-Amp, 1.2 MHz, AEC-Q100

MPNLM2902DBR
Obsolete

Texas Instruments LM2902DBR, Automotive AEC-Q100 quad general-purpose op-amp, 1.2 MHz gain bandwidth, 0.5 V/µs slew rate, 1.4 mA supply per quad, 3 V to 26 V supply, -40 to 125°C, 14-SSOP.

$0.1100Ref. price · indicative, final on quote
Texas Instruments LM2902DBR datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM2902DBR specifications
ParameterValue
SeriesAutomotive, AEC-Q100
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span26 V
Current - supply1.4mA (x4 Channels)
Current - input bias20 nA
Current - output (Channel)30 mA
Operating temperature-40°C~125°C(TA)
Gain bandwidth product1.2 MHz
PackageBulk
Slew rate0.5V/µs
Case14-SSOP (0.209\", 5.30mm Width)
Number of circuits4

Product details

Quad op-amp with automotive-grade temperature range

The LM2902DBR: Each of the four amplifiers draws 1.4 mA supply current, and the part runs on a single supply from 3 V to 26 V. The 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate cover sensor amplification, active filtering, and level-shifting in automotive ECUs and industrial control modules.

Obsolete — plan for a replacement

The closest functional replacement is a standard LM2902 quad op-amp in an SSOP-14 package — confirm pin-compatibility and electrical ratings before substituting.

The SSOP-14 footprint is common and matches many standard quad op-amp layouts, but always confirm the pinout against the datasheet before committing the board.

Frequently asked questions

What is the replacement for LM2902DBR?

Texas Instruments has not published an official successor order code for the LM2902DBR. The closest functional replacement is a standard LM2902 quad op-amp in an SSOP-14 package — verify pin-compatibility and that the substitute meets your required temperature grade and AEC-Q100 qualification before substituting.

Is LM2902DBR automotive grade?

Yes, the LM2902DBR is listed with the Automotive, AEC-Q100 series designation, meaning it is qualified to the AEC-Q100 stress test standard for automotive-grade integrated circuits.